Why Resiply?

Here are some frequently asked questions…

Question. Is it easy to use for a novice or D.I.Y.?
Answer. RESIPLY is less complicated than standard sand and cement to
mix and apply. (A step by step guide is overleaf)

Question. Is it cost effective in the long run?
Answer. Yes as RESIPLY takes far less time to apply and can be applied in inclement weather conditions such as rain or extreme heat etc.

Question. Does it change the colour of the paving after pointing?
Answer. Only very slightly at first or not at all. After a short time will disappear completely. And it usually enhances the colour of the product.

Question. Will RESIPLY last longer than sand cement etc.?
Answer. RESIPLY is far more hard wearing and tolerant from erosion, expansion and contraction than standard sand/cement/mortar.

Question. Can Resiply be applied at different times eg. day by day?
Answer. Yes without colour change or loss of performance.

Question. Once the product had been opened must all the product be used like some other epoxy mortar products?
Answer. No you only mix the amount you need.

• Resiply should be applied with a minimum pointing depth of approx. 10mm.
• Drying times vary according to temperature summer approx. 3-4 hours / winter 4 - 8 hours plus
• Tools for the job - Brushes: Stiff and then soft. Mechanical mixer or mix in bucket trowel or jointer optional.
• Protective clothing is essential ie. Oil proof gloves, safety glasses, coveralls, boots etc.
• Care should be taken when applying resin mortar not to transfer resin on feet or gloves etc.
• Clean all tools with soapy water.